Time for the final Penguin to add to the collection...
You will need :
10 x 12 cm of felted wool for the body (although if you have no felted wool, just use fabric)
10 x 10 cm of felted wool for the base,
eyes and wings
4 x 4 cm of craft felt for the beak
6 x 6 cm of craft felt for the fish
6 x 5 cm of fabric for the tummy patch
5 x 8 cm of fabric for the wings
2 small buttons for the eyes
2 small buttons to attach the wings
Selection of embroidery thread (I used
pearl cotton 8, but any will do)
Small pebble to weight the bottom
Small piece of card for the internal base
Tracing paper and a pencil to trace the
Plus the usual suspects, pins, needle,
Before you begin, print out the templates so the complete image is a
finished size of 9 x 14 cm, that should make them the correct size to
work with, any problems with that though, just send me an email (there's
a link in the sidebar -->)
Step 1 : For
the body cut two shapes ,using the template provided, from the felted
wool. Pin, right sides together
and stitch, roughly 0.5cm away from the edge leaving the turning gap open. Turn the body right side round, and
fill with the stuffing. Keep going
until you are happy with the shape.
Make a well within the base of the stuffing for the pebble. Pack the pebble in place by adding a
bit more stuffing and finish off by cutting a small oval shape from the card
(cut this by eye as it’s hard to give an exact size due to the felted wool
stretching when stuffed) and place it just inside the open end. Cut the base piece from the felted
wool, place it over the open end to cover the hole and secure in place with
random straight stitches.
Step 2 :
Place the felted wool for the wings wrong side together with the fabric. Cut out one wing through both
layers. Flip the template and cut
the second wing. Sew around the
edge of each wing using blanket stitch.
Attach one wing to each side of the penguin with a small button,
positioning them fabric side facing out, with the more curved edge towards the
front of the penguin.
Step 3 : Cut
two circles for the eyes from the felted wool and stitch onto the face with one
of the small buttons in the center of each eye. Cut out the beak, fold in half and attach along the folded
edge with random straight stitches.
From the fabric, cut out a tummy piece and sew into place again with
random straight stitches.
Step 4 : To
make the fish, cut 2 fish shapes from the craft felt, join the 2 together by
sewing blanket stitch round the edge.
Add a small french knot to each side for an eye.
Your little penguin is now complete. You can make as many babies as you
like! (sewing wise I mean, not literally!)
(templates, just drag & drop the image onto your desktop to print)
As always with my free patterns, YES ...you can sell what you make (as long as you don't go into mass production), just add a copyright mark to say ⓒ Lucykate Crafts... within any written description and also make sure you join the Lucykate Crafts... Pattern Pieces Flickr group to show off what you make. Happy stitching!