November 22, 2012

Beanie sewing pattern...

Whatever the weather, I mostly walk the school run as parking can be problematic.  In wind and rain, hoods blow down, so a hat can be the best option for keeping dry.  My winter coat is probably best described as being mushroom in colour, and I've been on the look out for a matching hat for ages but not found anything quite right.  Simple solution I suppose, knit one.  But I don't knit, so simpler solution... sew one!

After rooting through my collection of old jumpers, it took about five minutes (that's after I'd drafted the pattern) to cut it out and sew.  What could be easier?
 
This is what you'll need...

a body panel (front or back will do) from an old woollen jumper 
(one panel is roughly big enough to make one Beanie and include the ribbed bottom edge in your measurements) 

piece of paper - 20" (horizontally) x 11 1/2" (vertically) 

plus a pencil, scissors, pins and your sewing machine (you can sew it by hand but it's much quicker on a machine)

Step 1, Fold the piece of paper in half, and then half again so it's now in quarters.  Follow the pattern below for the measurements and shape to cut, cutting through all four layers of paper simultaneously.


Open out your paper pattern to double check it's cut correctly, it should look like this...


Step 2, Fold the paper pattern back in half, and place it on top of the folded (right sides together) jumper panel, lining up both the folded edges and pin to secure.  Stretch the jumper out while pinning if need be.  Next, cut out the Beanie shape from the jumper, cutting through both layers of fabric. Remove the pattern and re pin just the jumper panel in half.

Step 3, Stitch along edge 1, and then edge 2, but while you are sewing edge 2, stop at the marker, turn the beanie inside out (so it is now actually right sides round), and complete stitching edge 2.  This is so when you fold over the ribbed edge, the seam won't show on the outside of the hat.


Step 4, Turn it back so it's inside out again, and re-fold the Beanie so the 2 seams you have just sewn are now central.  Pin and sew the last curved seam around the top.  


Step 5, Turn the hat right side round, fold over the ribbed edge section and give it a quick press with an iron, and it's all done!


 A few tips which may help...
  • wear the hat with the long seam at the back, shorter seam to the front as it'll look neater
  • by all means, adjust the pattern to fit your head by making it wider or narrower if it's for a child
  • you may need to stretch out your jumper panel to fit the pattern, but don't worry about doing this, as knitted fabrics do have a lot of give in them
  • you can add decoration, a pom pom or a flower and some buttons
I now have one in mushroom, one in blue, brown next I think...

18 comments:

Twiglet said...

Fab little hat - thanks for sharing. x Jo

Bella Brides said...

Nice, clear, concise instruction. even I could make this!

Anonymous said...

Very nice and a great use for all those older sweaters we all have hidden in drawers/closets!! Thanks for sharing!! Hugs, Doreen

Anonymous said...

Wait..what? it appears as if you have used a sweater yet the tutorial mentions to use an old woolen jumper.I guess I'll try it with a sweater since I no longer wear jumpers. Thank you for all the work you did to present these directions.

anya said...

Hi there! New to the world of craft blogging, I immediately ran a google search for some other craft blogs and I absolutely love this one! Your instructions are very concise and detailed, and the pictures are super helpful. I think I will be making this hat soon... :)

Patti said...

Thanks for the pattern! My son just brought me a sweater he accidently felted by washing wool in hot water. Now I know what to do with it!!

Jackie @ Fred-and-Cissy said...

I love your beanie pattern - it looks like a great upcycling project, and could also see a lightweight baby version from a T-shirt. Its summer here in Australia, so I've just Pinned your tutorial for next autumn. Thanks for going to the effort to put it online.

Marina Goodrich said...

wow thank yo so much i really love to sew and ii was trying to find a good tutorial on this so thank you you made my day !!!!

Tya Jenyce said...

The creativity and wisdom of others so excites me. Thank you for sharing!!!!

Maddy said...

Just what I needed - thank you. With a few minor adjustments, it'll be just perfect.

diy-er said...

This is great! So easy, took minutes! and now I have a Christmas gift for a lucky family member.

Lindy Stankov said...

Thanks for the pattern and instructions. I am going to make myself a cap for chemo.

Chanel (nbr5) said...

Wonderful tutorial! BEEN looking for a beanie tutorial and yours was super easy to follow. I just made one in minutes out of t-shirt scraps! Thanks so much for posting :)

beckyandbecky2010 said...

This is wonderful. I was looking for a simple sewing pattern for an upcoming project (going to slightly alter it for children) and this is perfect. I'm so excited to be able to do this when I get home from visiting my out of town relatives that it might be the first thing I do. Thanks so much! <3

Dwayne Baker said...

THANK YOU SO MUCH FOR THIS SIMPLE AND VERY DESCRIPTIVE TUTORIAL OF HOW TO SEW A BEANIE FROM SCRATCH!! I've been searching for days on Youtube and other websites through Google and no one had goos explanations or videos as good as you. I want to thank you from the bottom of my heart because now I can create beanies for my brand. Im super excited.

Have a wonderful day!

Nikki Legresley said...

Hi Amy.
Great, very easy Beanie. Easy to follow instructions. I made this from scratch with knit fabric. Love it!!!
I will wear it under my bike helmet in winter.
Thanks sooooo much for sharing this.
Good luck
Nicole

Jones Morris said...

The company offers a choice of imprinting logo of one’s choice on the beanie. custom beanies with pom

Marysia said...

Hi there,
Thank you so much - your posting and pattern are fabulous.
I. have just been selected to receive free, soft jersey fabric on the understanding that the fabric is used to make chemo hats and get them distributed to my local hospital, via Macmillan.

Thank you again, for going to the trouble of posting this